Saint Saver

Attaching the lid to the washer rack bottom:

Fully extend all four arms of the lid.
Set the lid down over the cup filled bottom tray as shown in the picture.
Slide the arms inward, back towards their retracted position. As the arms are retracted, a slot on the inside face of each arm engages the long sides of the washer rack’s bottom and thereby locks the lid and bottom together.

Loading the dishwasher:

Flip the washer rack upside down so that the open end of the cups faces downward.
For residential style washers, extend the arms of the washer rack until the hook at the end of each arm engages the upper perimeters of the dishwasher baskets. The Saint Saver™ Washer Rack does not rest on the dishwasher’s dish holding configurations, but spans over them.
For commercial washers, fully retract the arms of the washer rack so that the hook ends of the arms are flush with the end of the washer rack’s other parts. Set the Saint Saver™ Washer Racks into your dishwasher’s washing tray. A bowl washing tray is best due to its larger openings in the bottom.

Communion cups are securely held in the washer racks which are easily transported to the dishwasher.

Two Saint Saver™ Washer Racks fit into each commercial dishwasher washing tray.

washer rack specifications

Each Saint Saver™ Washer rack holds sixty (60) communion cups.

Four washer racks fit into most residential style dishwashers

(two in the top basket and two in the bottom).

Saint Saver™ Washer Rack Dimension: 8-5/16" wide x 18" long.

Saint Saver™ Washer Racks are made with the following materials:

High Density Polyethylene (HDPE) for the top, bottom and sliding arms.
316 Stainless Steel for the two reinforcement bars.
18-8 Stainless steel for the alignment pin cap screws, locknuts, foot screws, and rivets that fasten the sliding arms to the top.
Nylon for alignment pin and foot spacers.